In the use of Pogo Pin, some customers will encounter problems such as the pogo pin compression is not smooth, the pin is stuck, and the common manifestations are the preload is not smooth, and the needle cannot work normally.
The reasons can be analyzed from the following six aspects:
1. The structural design of the needle tube and needle;
2. There is solid glue or colloid residue that plugs the nozzle, causing the needle shaft to not be pressed normally;
3. The poor surface electroplating process causes the tube wall to be excessively rough;
4. In the production process, the process is not standardized, and there is debris or debris stuck in the internal spring, etc.;
5. Poor assembly process causes the nozzle to collide;
6. Working stroke: The amount of compression is generally 2/3 of the total stroke. Too little pressing and insufficient positive force will lead to unstable impedance; too much pressing will damage the nozzle and cause the pin to be stuck.
Special attention should be paid to the manufacturing process of pogo Pin manufacturers to prevent the glue from contacting Pogo Pins. Choosing Shenzhen Toplink Technology Co., Ltd., a manufacturer of Pogo Pin production strength, can effectively avoid the occurrence of quality problems.
We focus on the field of Pogo Pin and improve the core capabilities of coating technology, waterproof technology, and digital simulation analysis technology to the industry-leading level. Any questions, please feel free to contact us.